Series 1000 - Master Ceramic OX™
Our products will REPAIR, REBUILD, PROTECT & CONSERVE
Your Equipments, Machineries, Buildings and Structures.
Engineering Solutions to: Heat Exchangers, Condensers, Valves, Pumps, Chemical Pits, Chemical Waste Areas, Chemical Drainage Areas, Petroleum Tanks, Salt Water Pipes, Chemical Pipes, Valve Bodies, Pump Bodies, Impellers, Propellers, Towers, Chimneys, Bottom Tanks, Chutes, Hoppers, Wet Liners, Chemical Tanks, Catalytic Towers, Conveyor Belts, Under Water Pipes, Under Ground Pipes, Radiator Head & Bottom, Ram Shafts, Cooling Towers, Electrical Conducts, Floating Roof Tanks, Concrete Foundations, Warehouse Floors, Traffic Marking, Roof Leaks, etc.
Master Tec™ 1010
Master Ceramic OX™ (Fast curing time)
Severe chemical corrosion/erosion resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
Fast cure time.
Master Tec™ 1020
Master Ceramic OX™ (Slow curing time)
Severe chemical corrosion/erosion resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
Slow cure time.
Master Tec™ 1011
Master Ceramic OX-MTO-174™ (Fast curing time)
Severe chemical corrosion/erosion resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
Fast cure time.
Master Tec™ 1021
Master Ceramic OX-MTO-174™ (Slow curing time)
Severe chemical corrosion/erosion resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
- Slow cure time.
Master Tec™ 1012
Master Ceramic OX-HT™ (Fast curing time)
Severe chemical corrosion/erosion/high temperature resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion, erosion and high temperature.
- High temperature resistant.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
Fast cure time.
Master Tec™ 1022
Master Ceramic OX-HT™ (Slow curing time)
Severe chemical corrosion/erosion/high temperature resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion, erosion and high temperature.
- High temperature resistant.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
Slow cure time.
Master Tec™ 1014
Master Ceramic OX-HF™ (Fast curing time)
Severe chemical corrosion/erosion/hydrofluoric acid resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent for severe hydrofluoric acid corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
Fast cure time.
Master Tec™ 1024
Master Ceramic OX-HF™ (Slow curing time)
Severe chemical corrosion/erosion/hydrofluoric acid resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent for severe hydrofluoric acid corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
- Slow cure time.
Master Tec™ 1015
Master Ceramic OX-HFA™ (Fast curing time)
Severe chemical corrosion/erosion/fluorhydric anhydrous acid resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent for severe fluorhydric anhydrous acid corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time
Master Tec™ 1025
Master Ceramic OX-HFA™ (Slow curing time)
Severe chemical corrosion/erosion/fluorhydric anhydrous acid resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent for severe fluorhydric anhydrous acid corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
- Slow cure time.
Master Tec™ 1016
Master Ceramic OX-HF-HT™ (Fast curing time)
Severe chemical corrosion/erosion/high temperature/hydrofluoric acid resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion, erosion and high temperature.
- High temperature resistant.
- Excellent for severe hydrofluoric acid corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1017
Master Ceramic OX-UW™ (Fast curing time)
Severe chemical corrosion/erosion/under water application resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Under water application.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1018
Master Ceramic OX-Flexible™ (Fast curing time)
Severe chemical corrosion/erosion/flexible resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Flexible ceramic coating.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1019
Master Ceramic OX-Galvanic™ (Fast curing time)
Severe chemical corrosion/erosion/galvanic corrosion resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- For galvanic corrosion and bimetallic corrosion attack.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1030
Master Ceramic OX-Concrete Sealer™ (Fast curing time)
Severe chemical corrosion resistant coating for concrete
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent concrete sealant.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1040
Master Ceramic OX-Concrete Sealer™ (Slow curing time)
Severe chemical corrosion resistant coating for concrete
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent concrete sealant.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Formulated to be applied in thick horizontal coatings. 50 to 250 mils DFT in just one coat.
- This product can be mixed in large quantities of 5 gallons or 30 kilos and poured into the substrate. It is self-leveling.
- It is the best product for applications where it requires rebuilt and protection of bottoms storage tanks.
- Slow cure time.
Master Tec™ 1031
Master Ceramic OX-Antifouling™ (Fast curing time)
Severe chemical corrosion/erosion/barnacles/crustaceans/algeas resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent coating against barnacles, crustaceans and algeas.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
Fast cure time.
Master Tec™ 1032
Master Ceramic OX-Glide™ (Fast curing time)
Severe chemical corrosion/erosion/cavitation resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Prevent slurry build up on any kind of surface.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
Master Tec™ 1033
Master Ceramic OX-Cavitation™ (Fast curing time)
Corrosion/erosion/cavitation resistant coating
- Repair, rebuild and protect all types of equipments, machineries, piping systems and structures against severe chemical corrosion and erosion.
- Excellent performance against cavitations.
- Designed to be applied by brush, roller or spray.
- Coverage per kilo is 2 (mt)2 at a DFT (Dry Film Thickness) of 10 mils.
- It is formulated with 100% solids, self-priming, not flammable, no shrinkage and free of solvents.
- Fast cure time.
